Cobalt blue copper tube earrings with some nice fire patina. I handcraft the copper earrings from copper tubing, hammer, drill, sand and torch enamel with several layers of vitreous enamel using the dipping method. Every piece is individually handcrafted. Unique jewelry for everyday!
Copper tube dangles are 1 inches (26 mm), total earring length 1 5/8″.
Handcrafted stainless steel earwires. (hypoallergenic)
Handmade in Maine.
WHAT IS ENAMELED COPPER?
Enameling is glass fused to metal at high heat. Enamels are finely ground glass, like fine sand (or even more finely pulverized and mixed with an oil or adhesive). They may be opaque or transparent; their colors come from the use of various oxides.
The pieces are then torch fired, either by holding with a steel rod or by using a trivet on a stand. Several layers of enamel need to be applied one at a time to produce a thick enough finish. Large pieces have to be fired one side at a time. This is where the real creativity happens! You can also melt metal wire, thin enamel sticks or crushed glass on your pieces at this point. The options are limitless and they don’t always work out, but you can also achieve unexpected beautiful or interesting results. That’s part of the fun!
Enameling is characterized by brilliant, non-fading colors, tremendous durability, variety of color effects depending on angle of light, and tremendous versatility – from jewelry, to bowls and wall pieces, to large-scale interior or exterior murals. The medium of enameling goes back two thousand years and forms part of the artistic heritage on six continents.
How to care for enameled copper: Enamel is glass, not paint, so it does not fade under ultraviolet light. It is possible to crack or shatter when the substrate is stressed or bent, but modern enamels are relatively chip- and impact-resistant because of good thickness control and thermal expansions well-matched to the metal. There is no particular care needed, you can wash it with water and/or wipe it with a cloth if needed.